Panelview plus 7 batch script

stu

Member
S
Join Date
Aug 2005
Location
England
Posts
783
Hi guys
I have had a thought regarding a quick hmi screen change for none experienced staff , is there a way that we can have a sd card or a usb with a batch script on to automatic add the correct IP address and the correct program , has anyone done this ? I would like to make the engineers life a bit easier
Any information would help thanks
Stu
 
This sounds more complicated to do than just teaching them how to do it, unless I seriously overestimate your engineers!
 

Similar Topics

J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
22
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
46
celso3093
C
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
71
Foxtrot2050
F
Y
PanelView Plus 7
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault...
Replies
0
Views
87
YellowRobot
Y
J
FactoryTalk View Studio, Panelview Plus 6 1000, Edit alarm message
Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
125
Jako
J
Back
Top Bottom