Adam_Oasis
Member
Hi all,
Anyone manage to get this smorgasbord of hardware to cooperate with each other?
PLC - Micrologix 1500 1764-28BXBAA
CH1 config - DF1 Full Duplex, 19200 Source ID 1, no parity, no hnd shk, CRC
HMI - PV1000 Gray Keypad 2711-K10G8L1
DH+ terminal config - Node 2 57600
Network Node config- Node 1 SLC-5/04 (no micrologix available, maybe this makes it impossible but I thought it should work)
Equustek DL3500 Protocol Converter Allen Bradley DF1 to DH+
Operating Mode - DF1 via USB/Serial to DH+
DH+ config - Node 6 57.6KBaud
DF1 config 19.2kbaud, no parity 8N1 no hnd shk RS-232C
Adv config - CRC, ignore duplicate msg, no embed rsp, pass diagnostic
point to point full duplex
I've function tested the plc port and hmi port and know they are working.
I feel the DL3500 should work, I can see it from my laptop RSLinx, the auto config picks it up as a 1770-KF2/1785-KE/SCANport.
I've put a bunch of time already into this and am beginning to think these devices simply are not compatible with each other or I'm missing something obvious, can anyone confirm this?
Adam
Anyone manage to get this smorgasbord of hardware to cooperate with each other?
PLC - Micrologix 1500 1764-28BXBAA
CH1 config - DF1 Full Duplex, 19200 Source ID 1, no parity, no hnd shk, CRC
HMI - PV1000 Gray Keypad 2711-K10G8L1
DH+ terminal config - Node 2 57600
Network Node config- Node 1 SLC-5/04 (no micrologix available, maybe this makes it impossible but I thought it should work)
Equustek DL3500 Protocol Converter Allen Bradley DF1 to DH+
Operating Mode - DF1 via USB/Serial to DH+
DH+ config - Node 6 57.6KBaud
DF1 config 19.2kbaud, no parity 8N1 no hnd shk RS-232C
Adv config - CRC, ignore duplicate msg, no embed rsp, pass diagnostic
point to point full duplex
I've function tested the plc port and hmi port and know they are working.
I feel the DL3500 should work, I can see it from my laptop RSLinx, the auto config picks it up as a 1770-KF2/1785-KE/SCANport.
I've put a bunch of time already into this and am beginning to think these devices simply are not compatible with each other or I'm missing something obvious, can anyone confirm this?
Adam