Hi,
I have a problem with a Omron plc,model HG200 CPU 43;I'm trying to connect with it but the error led is blinking.On the male serial port of the CPU I have short circuit pins 4 with 5,on the female serial port of the PC I have short circuit 4 with 6 and 7 with 8.I can't detect it with CX-Programmer (v9.7).The comms for Hostlink, 9600, 7, E, 2,also dip sw5 on.Do I need to turn any other off?I have all of them on beside 6.The run led it's on and the error led it's blinking.What should I do?
Thank you!
I have a problem with a Omron plc,model HG200 CPU 43;I'm trying to connect with it but the error led is blinking.On the male serial port of the CPU I have short circuit pins 4 with 5,on the female serial port of the PC I have short circuit 4 with 6 and 7 with 8.I can't detect it with CX-Programmer (v9.7).The comms for Hostlink, 9600, 7, E, 2,also dip sw5 on.Do I need to turn any other off?I have all of them on beside 6.The run led it's on and the error led it's blinking.What should I do?
Thank you!