How to give negative pulse to servo motor?

sankz

Member
Join Date
Mar 2010
Location
Mumbai
Posts
12
please help me
im interfacing servo to micrologix 1200.......and want o make a ladder to drive this servo......trouble is....how can i reverse the motion of servo?
 
You have not provided enough information to answer your question.

You really need to specify what drive you are using, how it is commanded, how it is wired to the MLX etc.
 

Similar Topics

I am troubleshooting an actuator which is not responding to the plc code. The range in the channel of the Allen Bradley 1756-OF8 Analog card is...
Replies
1
Views
606
I have 3 koyo PLC's in series. The 1st and 3rd are reporting values correctly but the 2nd is reporting negative values. The values in the PLC and...
Replies
3
Views
1,349
Hi, I am connecting an Autonics make stepper driver type, MD5-ND14 to a Kinco PLC (K205 series) this has a sourcing output which cannot be...
Replies
2
Views
1,102
Hello. I am trying to figure out how to setup a PID in Control Logix 1769 Controller in a way that it would control a drive speed by sending...
Replies
3
Views
1,598
I'm loading bulk tankers with dry powder using a 1769-L33ER. Product is fed through gates, and close to the end of the load the system jogs...
Replies
11
Views
3,073
Back
Top Bottom