1214 error led blinking.

Turn the power off
I have rebooted it several times. Actually i've profinet communication with
cu 240e-2 pn .when i am withdrawing communication blocks from plc,no error led is blinking. It come only when I am making communication.

It is saying HW ID 264.error in lower level component.
 

Similar Topics

Hello I have a siemens 1500 connected to a redlion DA30 I use the redlion to write an operator entered number (retained) to a register in the PLC...
Replies
11
Views
1,760
Hi there, I am trying to communicate between Siemens 1214 that I have and a Micrologix 1400 on the other end through CIP protocol. I downloaded...
Replies
4
Views
2,003
Good day I have a Siemens 1214c DC/DC/DC and i have created a program, i have activated the web server access in the properties of the plc. I...
Replies
1
Views
1,065
hi i want to know that do can use s7-1200(cpu-1214) for the following specifications: 45 DI 30 DO 20 AI 1 port ethernet
Replies
1
Views
1,515
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
5
Views
34
Back
Top Bottom