RS 485 Communication

Same problem with XGT Panel and XBG plc

mrelcvc said:
RexIR
I HAVE A PROBLEM TO COMMUNICATE xgt PANEL WITH plc xgb
CAN U GIVE ME an idea about the protocol between them ???
plzzz
ty
Click to expand...

Need your help
the communication between XP10 of XGT and XGB plc is not working !
plz help
 

Similar Topics

J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
157
jillgeorge18
J
D
ET200SP + Weidmuller RS485 + Pfeifer device communication
Good evening guys, Please, I need help. This is my first time working with RS485 comm and I dont know what to do. Please, see attached files. I...
Replies
0
Views
403
Dufino007
D
H
RS 485 communication problem
I am having PLC S7 200 smart model- ST 30 . In which I am getting problem in modbus communication of PLC and VFD via built in RS 485 port of PLC...
Replies
3
Views
733
AlfredoQuintero
A
D
Micrologix 1100 and Panelview 800 DH485 communication
Hi all, I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Replies
5
Views
882
DRB
D
C
Micrologix 1400 Modbus RTU, RS-485 Communication On Channel 0
I been tasked with setting up communication between a heating cooling unit manufactured by Advantage Engineering and a Microloagix 1400 plc. The...
Replies
6
Views
2,495
geniusintraining
geniusintraining
Back
Top Bottom