Hello All,
I have a GridConnect Xport-EIP-MB Modbus to EtherNet/IP converter Adaptor module. Recently I was able to modify the configuration file and upload and download it using a TFTP Client. The configuration file that I have is for firmware V1.13. I just made configuration changes and uploaded the file and after this even I cannot ping to the IP of the module or obtain the configuration file.
Looking at the configuration file I cannot figure out where I made the error. I have attached the Configuration file which caused the Xport-EIP-MB module not to respond, would any one be able to help on this matter.
A reply is much appreciated.
Cheers,
Mihiri
I have a GridConnect Xport-EIP-MB Modbus to EtherNet/IP converter Adaptor module. Recently I was able to modify the configuration file and upload and download it using a TFTP Client. The configuration file that I have is for firmware V1.13. I just made configuration changes and uploaded the file and after this even I cannot ping to the IP of the module or obtain the configuration file.
Looking at the configuration file I cannot figure out where I made the error. I have attached the Configuration file which caused the Xport-EIP-MB module not to respond, would any one be able to help on this matter.
A reply is much appreciated.
Cheers,
Mihiri