How to configure "Siemens PP17-II Push Button Panel" on Ethernet network.

pjadha

Member
P
Join Date
Feb 2014
Location
pune
Posts
22
Hello Siemens experts please help me to Configure PP17 panel on Ethernet network in S7-300 CPU315 2PN/DP.

I have "S7-300 CPU315 2PN/DP" and "Siemens PP17-II Push button panel". I want to configure it on Ethernet network. I tried to do it but while doing it asks for MAC Address. And I don't know how to get MAC Address and configure it. Please someone tell me Procedure how to configure it......
 

Similar Topics

N
Configure Siemens S7-300 as I-Device
Good Morning!! I am trying to configure a siemens s7-300 cpu as an I-Device, to read the data on a GE RX3I PLC. Do you need to do some ladder...
Replies
10
Views
3,330
AlfredoQuintero
A
N
Siemens configure fanuc Profinet cp1616
Hi Guys I have some issues with profinet configuration Siemens step 7 v5.5 Fanuc robot profinet card cp1616 I have 8 byte safety 16 byte...
Replies
1
Views
2,055
sigmadelta
S
C
How to configure and programming to write bool values to siemens plc s7.300 via modbu
Hi Sir, I am using S7-300/400. I am usually using FC 03 and FC04 to transfer (R/W) bool values by moving them DBs. However i want to R/W bool...
Replies
1
Views
2,050
Henny
H
A
how to configure siemens s7-300 DI/DO
model;simatic S7-300,315-2AG10-OABO DIO SIM323 D16/DO16*DC24V,323-1BL00-0AA0 Problems, i have configured the CPU and digital hardware as stated...
Replies
4
Views
3,087
avremail
A
A
which software is used to configure mitsubishi smart touch hmi ms-60t-pe
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Replies
3
Views
144
azadM
A
Back
Top Bottom