network parameter fo A3A cpu

mouhab_ah

Member
M
Join Date
Jan 2014
Location
Egypt
Posts
20
I have a A3A mitsubishi cpu plc master and local connecting through coxial cable ,

these two plcs exist in printing machine and the master one had lost his program , i found a program written on papers so I rewrite it using gx devoloper.

now i face a problem with network parameter , beacuse the master unit is also connecting to 6 remote i/o module through twisted pair cable .

i will upload the diagram of the newtork for both plcs and with the remote i/o unit .

and when i upload the program with out parameter it give me an alarm in plc link par. error

please help.
 

Similar Topics

I
network parameter setting problem (CC-Link)
Currently I'm using CC-Link modul QJ1BT11N as master station. The CPU I'm using is Q Series CPU, Q02(H). The problem is, I don't understand how to...
Replies
0
Views
2,794
icekalt
I
S
CP5512 - Network Parameter Configuration Issues
Hi All, I need some help here, I'm trying to set up this CP5512 adapter to communicate with the Siemens PLC, all I left is to set up the...
Replies
4
Views
3,796
RRobbins
RRobbins
M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
4
Views
81
mburtis
M
mad4x4
Network Switch supplier USA
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Replies
6
Views
163
joseph_e2
J
mad4x4
Scalance Ring NEtwork
We are having an issue with some servers, with "Teamed NICs" is we plug one cable leg of the team into one switch and the other to another...
Replies
0
Views
57
mad4x4
mad4x4
Back
Top Bottom