We are using T1k - modbus terminated IO (Remote IO) with direct automation plc DL-06. We are trying to communicate between the two using the MRW & MRX instruction but it doesn't work.
We have also checked using modscan32 software with RJ12 port with serial cable but they are not talking to each other.
the dips switch setted are as follows
SW1 - ON, SW2-OFF, SW3-ON, SW4-ON, SW-5 -OFF, SW6-OFF, SW7-OFF, SW8-OFF.
Please Suggest
Thanks
Pramod
We have also checked using modscan32 software with RJ12 port with serial cable but they are not talking to each other.
the dips switch setted are as follows
SW1 - ON, SW2-OFF, SW3-ON, SW4-ON, SW-5 -OFF, SW6-OFF, SW7-OFF, SW8-OFF.
Please Suggest
Thanks
Pramod