ProSoft BacNet PS-QS-1x10-0780

celichi

Lifetime Supporting Member
celichi
Join Date
Apr 2008
Location
Greater Toronto Area
Posts
415
Good Morning,

Has anyone used the Ethernet/ip to Bacnet IP Gateway?

Do both Ethernet/IP and Bacnet/IP exist on the same LAN?

Thank you,

Paul
 

Similar Topics

ceilingwalker
BACnet ProSoft Module
Hello all. I have a project that requires the use of BACnet over RS485. I am looking for something low-cost that I can connect that will talk...
Replies
1
Views
1,811
dchartier
D
R
ProSoft Ethernet/IP to BACnet/IP. Gateway or ControlLogix Slot Unit
Good Morning from the "Waist Deep in Snow" Mid Atlantic. I have a question about the 2) options that ProSoft has for Ethernet/IP to BACnet/IP...
Replies
4
Views
4,439
Scadadoctor
S
L
Prosoft MVI69E-MBTCP - Config help
Hi, We have an application that has a device that goes through a reboot (appears un-graceful) What then happens is the MVI module appears to hang...
Replies
0
Views
59
lostcontrol
L
I
Prosoft Datalogger w/ DF1 Comms to SLC 5/05 - Testing with MicroLogix
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Replies
3
Views
93
Ken Roach
Ken Roach
M
Prosoft AN-X4 DH+ to Ethernet Gateway -- setting up HMI
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
Replies
9
Views
273
TheWaterboy
TheWaterboy
Back
Top Bottom