M221, SoMachineBasic, Ethernet IO Scanning

Blevine

Member
B
Join Date
Mar 2018
Location
Leicester
Posts
9
Hi everyone,

I'm trying to do an Ethernet IO Scanning using SoMachine Basic on M221 and I am trying to connect an Access Point like ZBRN1. I have configured, and created a simple logic that references the IO Scanner registers. Can't read any value at the moment.

Do you have any idea how to do it? Any help will be appreciated.

Thanks!
 

Similar Topics

J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
179
jillgeorge18
J
P
M221 serial line stuck (stress test)
Hi, I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
Replies
0
Views
83
Paulo Balbino
P
P
TMC2CONV01 x TMC2SL1 for Schneider Electric M221?
Hi, I am stuck with these SE cartridges, I am trying to add a second serial port rs485 to a M221 PLC. What is the difference between TMC2CONV01...
Replies
1
Views
116
modiconguy
M
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
108
BODUSEYTU
B
S
0-5A Input (x3) on M221
Hello all, I need to build a system that will operate various AC contactors and 'lock' them out for a predertimed time when a set current value...
Replies
6
Views
317
Tom Jenkins
Tom Jenkins
Back
Top Bottom