OMRON program instructions TKON and TKOF

pascar · Sep 5, 2006

Hi all,

I'm looking at a OMRON program and there are two instructions in there I couldn't find descriptions for. This program looks quite old and I don't know which software was used to develop it. Anybody knows what TKON and TKOF instructions are doing exactly? Any help would be appreciated.

Thanks.

gtsuport · Sep 5, 2006

TKON = Task On, TKOF = Task Off. Probably an Omron CS1, although I think the CV also may have supported Tasks.

This allows for certain code sections to be turned on and off through ladder. You should be able to find information in the Omron W340 manual.

Omron W340 at Mr.PLC.com

Hope this will help.

pascar · Sep 5, 2006

Thank you very much gtsuport. Information I was looking for is in the manual you recommended.

BITS N BYTES · Sep 6, 2006

W340 Manual on mrplc.com is older version 11.
Go to Omron website for latest version 12.

http://oeiwcsnts1.omron.com/marcom/pdfcatal.nsf/PDFLookupByLinkCode/Man-W3403of3?OpenDocument

pascar · Sep 6, 2006

Thanks BITS N BYTES.

OMRON program instructions TKON and TKOF

pascar

Member

gtsuport

Member

pascar

Member

BITS N BYTES

Lifetime Supporting Member

pascar

Member

Similar Topics