PCS7, Step7 and notebook with AMD Sempron

Gambrinus

Member
G
Join Date
Oct 2005
Location
Riga
Posts
248
Do somebody have any experience with Siemens software and notebooks with AMD? Did any conflicts occur between notebook hardware and Siemens software or not?
 
The PROBLEM IS THAT MY COMPUTER HAS A PROCESSOR To 64 BITS
http://simatic.net.ru/viewtopic.php?t=4281
erroroe71tz2.jpg


Decision in
http://support.automation.siemens.com/GB/view/en/22156511
 
Last edited:

Similar Topics

A
MODBUS MASTER/SLAVE PCS7 9.1 SP1
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
121
Arun Kumar Yadav
A
F
TIA Portal installation with PCS7
Hello, Is there a sequence when installing both TIA Portal and PCS7 in the same PC? First TIA and then PCS7 or viceversa? Thanks in advance.
Replies
0
Views
476
Facu2998
F
F
Project PCS7 Alarms in TIA portal
Hello, I'm currently working on a project involving both PCS7 (v9.1 sp2 upd1) and a Panel Comfort system. This necessitates the use of TIA Portal...
Replies
2
Views
780
Facu2998
F
R
Brand New to the PCS7 Block World: Tank level control
I'm coming from a background of PLC ladderlogic/rockwell products. I am new to blocks. Can you point me in right right direction? What I would...
Replies
5
Views
1,547
Peter Nachtwey
Peter Nachtwey
H
PCS7 V8.2 Reading actual day
Hello everyone, i would like to read in pcs7 v8.2 the actual day of the month(ex 1 or 25 of the month) i used as attached read_CLK AND DT_DATE but...
Replies
4
Views
1,912
Ken Moore
Ken Moore
Back
Top Bottom