ceilingwalker
Lifetime Supporting Member
I asked a question before about RSView 32 and I think I should asked my question a different way:I have a process that currently uses outdated versions of RSBatch and GE/FANUC iFIX (SCADA/HMI). It is an FIC cleaning process. It has a PLC-5 for control. Everything is so outdated on it that I can't get any support for it. What I should have asked here before was, what would you folks recommend? It is a very simple process that uses heated Hydrogen and HF Gases to clean aerospace parts prior to heat treating/plating/machining. The HMI is an Allen Bradley VersaView 1700P (6181P-17TPXPH ser D, Rev B. I'm pretty new to designing a system like this but what I was hoping to do was to make this as simple as running the few recipe's we have from only the PLC processor, and then the HMI for the operator's and a second HMI in the supervisors office. Any advice would be greatly appreciated. Thank you