FlexLogix Analog Scaling AOI , Check

kuk

Member
K
Join Date
Jan 2021
Location
TN
Posts
2
Hi,


i've write this AOI to send a ControlValue comes from pid and control a valve.
this valve is controlled through analog output.
the rang of analog output is: -10vdc to +10vdc.


the analog output card is 1794-[FONT=&quot]OE12.[/FONT]
[FONT=&quot]
[/FONT]
[FONT=&quot]i'am not sure if the limit are ok.[/FONT]
[FONT=&quot]
[/FONT]
[FONT=&quot]please feedback any correction or suggestion.[/FONT]
[FONT=&quot]thanx
[/FONT]


[FONT=&quot] [/FONT]

AOI_unscale.png Analog-output.png Analog_Data_Format.png
 
Last edited:

Similar Topics

B
FlexLogix Analog Scaling Help please!
As a Contrologix programmer I have always Right clicked on the Analog modules in the I/O Tree and scaled them 0-100 and then did programming math...
Replies
6
Views
18,260
narcilla
N
B
FlexLogix Controller Upgrade
I'm going to rephrase this question. I have a 1794-L34 controller i need to replace. Is there a better way to do this than to put in a 1769-L30ER...
Replies
6
Views
669
tlf30
tlf30
R
Flexlogix I/O Modules
what is Flexlogix I/O Modules?
Replies
6
Views
1,851
Operaghost
Operaghost
RonJohn
Two 1788-ENBT cards in a FlexLogix?
One of our systems runs on a FlexLogix 1794-L34 processor with a 1788-ENBT for plant network access and a 1788-CNC for remote I/O. The current...
Replies
3
Views
1,531
Ken Roach
Ken Roach
B
Change IP on 1788-ENBT flexlogix L34
Hi guys i have a flexlogix 5434 with 1788-enbt. On the processor is a sticker with IP 10.24.230.239 but i have no idea if that's correct. I...
Replies
6
Views
2,216
Blayss
B
Back
Top Bottom