AB ASCII commands with the 1769-ASCII Module

JayTremblay

Member
Join Date
Aug 2017
Location
Quebec
Posts
2
I have a current source and I want to control the output state, the voltage setpoint and the current setpoint. Also I have to monitor the current and the voltage of this source. The current source use SCPI commands. I would like to know how to make a queue of ASCII command. I can't use the AWA or the ARL, I don't have any serial port on my controller.
 

Similar Topics

Hey Everyone, I'm trying to communicate to an external device using ASCII Read and Write commands with RSLogix 5000. I need to Write an ASCII...
Replies
4
Views
3,509
I'm having some trouble getting this code to work. Currently I have a Ladder Logic version working perfectly. I converted the Code to Structured...
Replies
2
Views
1,859
:wish:Hello I want to sent the commands attached from PLC to DMX Controller.When i00 command is sent it replies as shown as fig in hyperterminal...
Replies
2
Views
2,034
Hi, I am trying to get Allen Bradley Micrologix 1400 to send ASCII commands over a RS-485 2 wire connection. I can get PuTTy to communicate just...
Replies
5
Views
9,040
This is my first time posting. I am using a SLC5/03 since we had an extra one laying around to mess with ascii commands before hooking up to the...
Replies
7
Views
4,011
Back
Top Bottom