PLC connection wz 2 wire Transmitter

Hi all of you....

I faced a problem in the site that i had to change connection between analog input 16 channel and flow transmitter 2 wire so i tried to connect it and but i found that all 16 channel read the same readings ...how to update the connection to be able to read every channel




thank you
B.R

We're going to need a whole lot more information than that to be able to help you...

What PLC? What analog module?

Yes of course ....

any way ....PLC Modicon Premium-wz Analog input module TSXAEY1600 from telefast ABE7 CP A02 to transmitter 2 wire

The problem is connection wrong which cause to read current when simulating on all the channels