Bhicks31
Member
I have a SLC500 5/05 and we have an alarm setup to monitor the status of the Analog Inputs we have wired to a 1746-NI8. We are using 5 of the inputs on this module. All 5 inputs are bouncing around a bunch.
I thought maybe the module was starting to fail so I just replaced the 1747-NI8. Still seeing the same bouncing signals. When I read the signals coming in the mA signals are not bouncing they are solid.
Any suggestions on what to try next?
I have videos of the bouncing signals but I cant get them to upload.
I thought maybe the module was starting to fail so I just replaced the 1747-NI8. Still seeing the same bouncing signals. When I read the signals coming in the mA signals are not bouncing they are solid.
Any suggestions on what to try next?
I have videos of the bouncing signals but I cant get them to upload.