jseavers
Member
We have a machine with a DL-06 PLC that is running production around the clock. I have very little experience with the Automation Direct stuff so bare with me. I purchased a HO-ECOM ethernet module and would like to install it in this PLC with as little down time as possible. We also have on the shelf this same DL-06 PLC as a spare. My question is could I set -up the spare PLC with the HO-ECOM card and give it a IP address at my desk then just install the HO-ECOM card in the same slot of the running PLC? All I want the ethernet card for is troubleshooting the PLC Via remote with Directsoft software. Thanks in advance for any help.