Š transfer tag database from Bailey OIS0 to WinCad Tools

europan

Member
E
Join Date
Mar 2004
Location
Blaine, WA
Posts
1
I'm having trouble getting my tag database, complete with scaling, off my Bailey OIS-20 and onto my Bailey WinCad Tools. this is an mtos to msdos conversion.

I managed to upload my tagcnfg.cf file from the OIS20 onto a 5.25" floppy. However, I dont know how to get it onto my MSDOS computer and either convert it to a TTG file or a DBF file. Bailey's instruction manuals give detailed information about how to get it from the OIS20 for use on the MSDOS engineering workstation, but dont say "how" to convert it from a CF file to a TTG. any help is greatly appreciated.
thanks,
Walt
 

Similar Topics

T
GX Developer v8.1 - Online/Transfer Setup menu item grayed-out
I'm trying to verify a project with a PLC. The Transfer Setup menu item is grayed out and every time I click Verify with PLC, I get an error...
Replies
1
Views
44
parky
P
B
Automatic Grid-Generator Transfer Panel
Hello, I need to create an automatic transfer panel that connects to the generator when the mains power is cut. I can draw up to 60kW and draw up...
Replies
0
Views
84
Bubblegun
B
S
Backplane Data Transfer Speed of CompactLogix 1769 Series?
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
98
robertmee
R
P
Panelview 550 program transfer issue
Hi all, Im having trouble transferring a program from one panelview 550 to an new one. I can insert a flash card into the old panelview and upload...
2
Replies
20
Views
347
plcguy2024
P
J
Omron CQM1H - NOS purchase - ERR/ALM LED On - Program Transfer Problems
Hi Everyone, I have a customer that needs a CQM1H (CPU51) replaced. They purchased the processor new-old-stock from a source they found online...
Replies
3
Views
348
jejump
J
Back
Top Bottom