Test code on real HW (S7-1513 or higher)

EStufC

Member
Join Date
May 2019
Location
Kikuara
Posts
69
Hello,
does anyone have an opportunity to test a code (small FB, SCL) for me on real hardware?

Hardware: S7-1513 or higher.


I need just look at trace which would show how a certain code behaves while executing on HW I mentioned above.
 

here is a source file and its appearance in the project.


-please put it in, for example OB30 (create it) with cycling time 3ms.
-set 5ms for FB sole input.
-assign FB outputs as per picture attached
-create trace in accordance with outputs
-perform trace
-make trace export
-do upload here


if you have any questions - please ask.

FB_appearance.png
 

Attachments

  • Test_FB.zip
    648 bytes · Views: 4
Last edited:
Have a look. It's the first time I've done a trace, so not sure if I got it right.


It's first time I did an import of trace. :)


I see no blanks and missing pulses. Did you follow timings (5ms) and 3ms for OB30 cycling time?
 
Last edited:
cardosocea,
do you remember which setting was when you performed that trace for me? OB1 or OB30?
Look at attachment please.

sampling-config.png
 

Similar Topics

How can I test some PID code I have written for a SLC-500 in RSLogix500, without having an actual processor to test on. I have used Emulate500 to...
Replies
3
Views
1,814
Hi guys, I am running some communication tests with an s7-1500 and I want to see what effect high cpu load / scan time has on my communication...
Replies
5
Views
2,553
A bit off topic. I don't understand what these guys are doing, it just seemed interesting/bizarre and somewhat related to what goes on here...
Replies
2
Views
1,729
Hello everybody, I'm new in PLC and I have a chance to hand on a PLC system; however, my Boss give me a Laptop with a folder of many PLC code and...
Replies
11
Views
10,594
I have a panelview 1000 (2711-K10C8L1) that is giving an error 74 on boot. I just replaced the displays in it. I noticed the firmware was old so I...
Replies
10
Views
4,816
Back
Top Bottom