Hello all.
I would need some advice.
I have an s7-1500 station linked to a KTP900 comfort panel. We would like to upgrade a machine with a measuring system of 8 position sensors and 8 force measuring sensors. The position sensors are on a profinet interface and the 8 force sensors would go through high speed analog inputs.
I would like to display a trend where X is travel and Y is force. The trend should be as accurate as possible. So I would need the panel to display this trend but, from what I have experience the fastest time for the update of the tags on the panel is 0.1 s. I fear that this is not fast enough and the trends will not be really helpful.
I hope that you know what I mean. I am also open to a different approach
Cheers
Aleix
I would need some advice.
I have an s7-1500 station linked to a KTP900 comfort panel. We would like to upgrade a machine with a measuring system of 8 position sensors and 8 force measuring sensors. The position sensors are on a profinet interface and the 8 force sensors would go through high speed analog inputs.
I would like to display a trend where X is travel and Y is force. The trend should be as accurate as possible. So I would need the panel to display this trend but, from what I have experience the fastest time for the update of the tags on the panel is 0.1 s. I fear that this is not fast enough and the trends will not be really helpful.
I hope that you know what I mean. I am also open to a different approach
Cheers
Aleix