Going Online with Siemens S5 PLC

tonye

Lifetime Supporting Member
T
Join Date
Feb 2009
Location
Port Harcourt
Posts
6
How do i go Online with a siemens PLC S5, to monitor/view the PLC program? I know i have to connect to the PLC using a special current loop converter cable. but what i do not know is, what menu or key to use on the software to go Online.
Any idea?
 
Thanks, Mohamedzoba and Markie for your response.
If all beiing equal i shall be at the site tomorrow.
i needed a clue, on that as i could not find any during a short time R&D.
Sorry for my detail in responding, was trying to conclude some logistics.
 
Last edited:

Similar Topics

M
Siemens S7-400. Error When Going Online
Good Afternoon. I am having a problem going online with S7-400. Attached is the error that I am getting. I have looked at the help file but the...
Replies
7
Views
1,769
mk42
M
HJTRBO
Help with going online [Siemens cpu 555]
Hi all, Before I start I have tried searching, but unfortunately I am not coming up with anything useful... ... And I also feel a little shy...
Replies
7
Views
2,914
HJTRBO
HJTRBO
P
(AB,Siemens) Going online with a different project on PC
I went online with a Micrologix 1500. The thing is that when i was trying to go online I used the "Browse" fuction and then i selected the folder...
Replies
6
Views
6,253
plc-friend
P
B
GE Versamax micro:"OK led" down by going online
I do have a problem with a GE Versamax micro PLC. By going online (on Port 1) the "OK led" goes down. Power led stays On Port 2 no reaction at...
Replies
4
Views
389
BlackBoxRobotics
B
F
rslogix5000 1756 faults when going online
The machine is running production. When trying to go online with the laptop the whole machine looses communication and faults out. Drives, HMI...
Replies
13
Views
1,932
Ken Roach
Ken Roach
Back
Top Bottom