im looking to connect with my laptop by serial port and drive explorer w/ rs1 adapter, i have the adapter and my ab dealer says to use a null modem serial cable, its not working, the manual shows a cable with specific wiring, any experience with this? i also tried a regular serial cable
trouble connecting powerflex 160 to laptop
- Thread starter r-i-c-h
- Start date
Similar Topics
I have a new job programming PLCs and HMIs after being away from them for ~7 years. I am trying to establish a test setup with an old AB...
I have a problem connecting to a Controllogix L71 (version 20) via a 1756-EN2TR/C (Revision 10.0007). Secomea is a 3549 with the latest firmware...
Hello,
I am very new to this new hobby and am having difficulties connecting to my PLC CPU. I am not sure if I am doing something completely...
Was wondering if anyone had any suggestions:
I'm trying to connect to an old PanelView 1000 Touchscreen model# 2711-T10C16L1 via RS-232.
I'm...
I am having a hard time configuring my Micro820 PLC with Connected Components Workbench as a scanner for my fanuc robot. Any advice on this?