HW Config cfg file - Asset ID (Simatic S7)

hein123

Member
Join Date
Aug 2010
Location
Uitenhage
Posts
93
No idea where to start to try figuring this out.
I basically want to generate a cfg file based on equipment, but can't seem to figure out how to calculate / speculate what the ASSET ID should be?

Would this be somehow possible?

STATION S7300 , "SIMATIC 300-Station"
BEGIN
ASSET_ID "1E8F843D647A4243B97D15E9F3EDF57B"
REPORT_SYSTEM_ERRORS "0"
OBJECT_REMOVEABLE "1"
POS_X "0"
POS_Y "0"
SIZE_X "0"
SIZE_Y "0"
CAX_APP_ID ""
OBJECT_COPYABLE "1"
CREATOR ""
COMMENT ""
END
 

Similar Topics

Hello Folks, Has anyone configured a Momentum high speed counter on Unity 13.1. We need the wiring diagram for Momentum High speed counter and...
Replies
0
Views
65
Hi everyone, I’m trying to copy the configuration from one MVI69-MCM to another. I am having no luck establishing serial comms with the device...
Replies
0
Views
66
I have 3 new PowerFlex 7000 VFD's. Rockwell was out to do some checking before startup. These are part of a larger electrical project. I gave the...
Replies
7
Views
277
Hello Everyone, What is the best practice for DLR set up. Should I keep all VFDs on one DLR and FlexIO on another or it would make sense to put...
Replies
8
Views
2,519
Hi I have removed at IO card from a 1734-AENTR Point IO, from a slot in the middle, and moved the remaining cards together. Now the Point IO...
Replies
3
Views
641
Back
Top Bottom