Dear Folks,
I have a 315-2DP master that have several EM 277 slaves attached to it, a typical I/Q address for two EM's is as follows: Slave 1:1344-1407(32 word out/32word in)for their I/Q addresses
slave 2:1536-1599(32 word out/32word in)for their I/Q addresses
Now I want to reflect the status of one bit in slave 1 to be read in slave 2 , I tried to write a code in the 315, but the CPU doesn't accept an address of (I 1536.0 or Q 1536.0) for instance.
Waiting to get your help as usual.
Regards
Hagos
I have a 315-2DP master that have several EM 277 slaves attached to it, a typical I/Q address for two EM's is as follows: Slave 1:1344-1407(32 word out/32word in)for their I/Q addresses
slave 2:1536-1599(32 word out/32word in)for their I/Q addresses
Now I want to reflect the status of one bit in slave 1 to be read in slave 2 , I tried to write a code in the 315, but the CPU doesn't accept an address of (I 1536.0 or Q 1536.0) for instance.
Waiting to get your help as usual.
Regards
Hagos