Hello all need a little help. I inavertenly unchecked both radio boxes on the IP ports of a Kinetix 5500 drive and can not find out how to recover. Searched the manuals, and the web, can not find how to set to factory default or reset the ports. Thank You for your help in advance.
If your wondering how I managed to do this, well, I was having net problems. Slow and I mean slow. Was trying to trouble shoot the net and started with the first CIP Axis drive. Unchecked the enable port on one port. Went back and meant to recheck it and unchecked the other port by mistake. The connection was gone and can not get back in. The static IP address is in the drive but the ports not being active I can not get in.
Im using a 1769-L36ERS controller(compactlogix) and 12 Kinetix 5500 drives.
6 2198-Hxx015 and 6 2198-Hxx003. Star, linear topology.
If your wondering how I managed to do this, well, I was having net problems. Slow and I mean slow. Was trying to trouble shoot the net and started with the first CIP Axis drive. Unchecked the enable port on one port. Went back and meant to recheck it and unchecked the other port by mistake. The connection was gone and can not get back in. The static IP address is in the drive but the ports not being active I can not get in.
Im using a 1769-L36ERS controller(compactlogix) and 12 Kinetix 5500 drives.
6 2198-Hxx015 and 6 2198-Hxx003. Star, linear topology.