Wanted: UltraMaster software

Join Date
Mar 2007
Location
Brazil
Posts
1
Hi,

I need to reconfigure my 1398-ddm-019 drivers but i can't find the disk with the ultra master software from Allen Bradley or the reference about the host command interface (where you manually send the ASCII codes to setup the drive). I would appreciate if anybody could help. Thanks a lot.
 
BRU ou Ultra Master

Ola Grabriel!

Tambe estou precisando deste software, o BRU ou Ultra Master para fazer o tuning de um drive antigo.
Caso possa ajudar ficarei muito grato.

gabriel.falcao said:
Hi,

I need to reconfigure my 1398-ddm-019 drivers but i can't find the disk with the ultra master software from Allen Bradley or the reference about the host command interface (where you manually send the ASCII codes to setup the drive). I would appreciate if anybody could help. Thanks a lot.
 
Here is a zip file with the help file for UltraMaster. I have also included the Windows Help application to run it in.

I hope this helps.
 
Hi,

I need to reconfigure my 1398-ddm-019 drivers but i can't find the disk with the ultra master software from Allen Bradley or the reference about the host command interface (where you manually send the ASCII codes to setup the drive). I would appreciate if anybody could help. Thanks a lot.
Can you sent me link for Ultramaster software if you have?
Thanks
 

Similar Topics

I'm using raspberry pi 4b to poll 3 different plcs with modbus tcp and then publish the tag data using mqtt sparkplug b back to my Ignition...
Replies
15
Views
3,420
Hello, I'm struggling with getting an email to send using an eweb module on a controllogix system. Any chance I could get someone here to help?
Replies
4
Views
1,817
Greetings to all ... I've never owned or needed a household generator – but current conditions have convinced me that now's the time to buy one...
Replies
23
Views
6,732
With the Automation Directs Open Source Arduino Compatible PLC and the Open plc Project, plus all the Raspberry Pi HMI's, what are your opinions...
Replies
12
Views
4,259
Attention all PLCs.net members!! As Covid-19 has put many of us factory automation folks out of work, let’s work together to help get as many of...
Replies
18
Views
19,473
Back
Top Bottom