S7 300 to wonderware connection

gherz817

Member
Join Date
Oct 2005
Location
PHILIPPINES
Posts
58
I want to setup a scada system using Intouch 7.0. I am correct to

to use a Siemens Simatic NET S7 driver to communicate to S7 300?

Do i need another driver to read all IO from S7 300?

Thanks in advance..
 

Similar Topics

Hi all, Got a client who has requested a SCADA system for downtime tracking and so on. Right now, they want to implement it as a standalone...
Replies
20
Views
7,737
Hi all Siemens Expert..! I’m currently working on an interface communication with a Siemens S7-313, connected via Ethernet. Here is a list of...
Replies
7
Views
7,480
Hello, I need to be able to write time directly to a Siemens TON SFB4 timer. How can I do that through Wonderware Intouch using DasSiDirect...
Replies
2
Views
4,723
We have multiple oil drilling rigs. If an HMI fails on one rig, we will make a new image of the one we have here in the office, which is likely...
Replies
30
Views
12,757
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
29
Back
Top Bottom