stallone
Member
hello all,
i am tying to setup logging from my compact logix plc to an excel spreadsheet and database.
I have RsLogix 5000 v19 and using rslinx gateway.
I would like to log about 10 bits in the PLC program,
when the bit is activated and then reset.
Im using ALMD instuctions.
Is there a way to read/send automatically these tags to the excel spreadsheet and also have a way to see this data in a spreadsheet or report.
I do have ftview se edition but was hoping to just use what i have in the above.
i am tying to setup logging from my compact logix plc to an excel spreadsheet and database.
I have RsLogix 5000 v19 and using rslinx gateway.
I would like to log about 10 bits in the PLC program,
when the bit is activated and then reset.
Im using ALMD instuctions.
Is there a way to read/send automatically these tags to the excel spreadsheet and also have a way to see this data in a spreadsheet or report.
I do have ftview se edition but was hoping to just use what i have in the above.