Mitsubishi updates - PLCS.net

Tomtom79 · May 12th, 2022, 03:12 AM

I use iQ works and RT toolbox and have licenses for both. I usually go to mitsubishi's site to download latest versions. First question when contacting their support is always "do you use the latest version of GX works3"?

BUT, now I dont see updates here anymore. Any tips on where to find them? Maybe it's just me but I find their site very confusing.

AlfredoQuintero · May 12th, 2022, 05:27 AM

The link below shows download links. I was able to download firmware file for an i-QR CPU and a CC-Link IE TSN master board from there.
You may need to activate a translation tool.
https://www.mitsubishielectric.co.jp...ect=0&softid=0

parky · May 12th, 2022, 05:53 AM

I know recently they changed their websites so if you were a member then you have to log in & change your information, however, when I tried this I never received the activation link, tried again a few days ago still no link, not had time to pursue the issue.

Tomtom79 · May 12th, 2022, 03:22 PM

Checked my MyMitsubishi now and had a check box to mark and accept new terms. After a few clicks and reloads the page was exchanged and now this info is displayed:

MyMitsubishi

The Software download area is currently unavailable. In the future, you will find it in a different place. In the meantime, please contact your local sales or support teams. Thank you for your understanding.

So, just have to wait until they get the new download page working.

Thanks for now!

AlfredoQuintero · May 12th, 2022, 05:16 PM

Which piece of software do you need concretely? Maybe I can get it from the Japanese side and I would PM you with an FTP link with this information.

Tomtom79 · May 12th, 2022, 05:26 PM

No specific. I just usually check for updates on PLC and CAD software when I have a slower week. Better to do upgrades when I have some time to check that all is well than when we have an urgent fault.

Have happened more than once that when I try to do something, I have to start with a program upgrade to be able to continue with some firmware upgrade or so. So I try to keep programs up to date.

So no worries, just need to wait until Mitsubishi get things going again. Thanks anyway!

AlfredoQuintero · May 12th, 2022, 06:07 PM

Good then. Good practice what you describe above. In should emulate you.

May 12th, 2022, 03:12 AM	#1
Tomtom79 Member Join Date: Feb 2022 Location: Scania Posts: 7	Mitsubishi updates I use iQ works and RT toolbox and have licenses for both. I usually go to mitsubishi's site to download latest versions. First question when contacting their support is always "do you use the latest version of GX works3"? BUT, now I dont see updates here anymore. Any tips on where to find them? Maybe it's just me but I find their site very confusing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Mitsubishi A1SJH to Indusoft	edpg1	LIVE PLC Questions And Answers	3	January 16th, 2018 01:49 PM
Mitsubishi GX Developer Installation	Birdman89	LIVE PLC Questions And Answers	0	June 8th, 2016 02:04 PM
Mitsubishi F1 series counter question.	Tharon	LIVE PLC Questions And Answers	4	March 5th, 2015 04:48 PM
Mitsubishi Servo and Control Logix	Mike Carter	LIVE PLC Questions And Answers	0	January 6th, 2012 04:57 PM
Mitsubishi Q series	steadly	LIVE PLC Questions And Answers	2	February 24th, 2009 09:13 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

May 12th, 2022, 05:27 AM	#2
AlfredoQuintero Lifetime Supporting Member Join Date: Feb 2015 Location: Yokohama Posts: 985	The link below shows download links. I was able to download firmware file for an i-QR CPU and a CC-Link IE TSN master board from there. You may need to activate a translation tool. https://www.mitsubishielectric.co.jp...ect=0&softid=0

May 12th, 2022, 05:53 AM	#3
parky Member Join Date: Oct 2004 Location: Midlands Posts: 3,963	I know recently they changed their websites so if you were a member then you have to log in & change your information, however, when I tried this I never received the activation link, tried again a few days ago still no link, not had time to pursue the issue.

May 12th, 2022, 03:22 PM	#4
Tomtom79 Member Join Date: Feb 2022 Location: Scania Posts: 7	Checked my MyMitsubishi now and had a check box to mark and accept new terms. After a few clicks and reloads the page was exchanged and now this info is displayed: MyMitsubishi The Software download area is currently unavailable. In the future, you will find it in a different place. In the meantime, please contact your local sales or support teams. Thank you for your understanding. So, just have to wait until they get the new download page working. Thanks for now!

May 12th, 2022, 05:16 PM	#5
AlfredoQuintero Lifetime Supporting Member Join Date: Feb 2015 Location: Yokohama Posts: 985	Which piece of software do you need concretely? Maybe I can get it from the Japanese side and I would PM you with an FTP link with this information.

May 12th, 2022, 05:26 PM	#6
Tomtom79 Member Join Date: Feb 2022 Location: Scania Posts: 7	No specific. I just usually check for updates on PLC and CAD software when I have a slower week. Better to do upgrades when I have some time to check that all is well than when we have an urgent fault. Have happened more than once that when I try to do something, I have to start with a program upgrade to be able to continue with some firmware upgrade or so. So I try to keep programs up to date. So no worries, just need to wait until Mitsubishi get things going again. Thanks anyway!

May 12th, 2022, 06:07 PM	#7
AlfredoQuintero Lifetime Supporting Member Join Date: Feb 2015 Location: Yokohama Posts: 985	Good then. Good practice what you describe above. In should emulate you.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)