Clearing Faults in CLX L61

MorphuisOGrady · Dec 10, 2007

Hi Guys,

Is it possible for me to clear the faults on a CLX L-61 PLC from SCADA (WinCC V6.0). Hope this info is sufficient

Morphuis O

MorphuisOGrady · Dec 10, 2007

Tough one then?

SNK · Dec 10, 2007

I think it really depends on "what faults".
There are controller level faults,user defined faults,....
Can you be more specific?

MorphuisOGrady · Dec 10, 2007

Hi SNK,

Sorry, should have mentioned that. I mean controller level faults.

Oakley · Dec 10, 2007

I believe that Type 04 faults can be reset, but others cannot.

SNK · Dec 10, 2007

Why don't you just get a controller, fault it and then see what it takes to clear the fault. If you have to do something proprietry through LG5K, then I would say no, you can't clear those faults.
Experiment with some of the equipment that you have.
If you can toggle to the level, then you could reset via scada.
Have you read the faults portion of the LG5K manual?

widelto · Dec 10, 2007

there is a good explanation on how to handle clx faults in a manual called common procedures.

hope this will help you

Clearing Faults in CLX L61

MorphuisOGrady

Member

MorphuisOGrady

Member

SNK

Member

MorphuisOGrady

Member

Oakley

Member

SNK

Member

widelto

Member

Similar Topics