scott.lawrence
Member
In the process of adding a bunch of remote I/O to replace PLC5's in our process...
In the I/O tree, everything is showing up, but in controller tags, I can not see the In/Out for the modules (see pic). For instance, the first flex module in ScanShed_N is an output module, but there's no "O" in the controller tags. Anyone stumble into this before?
h/w: PLC - 1756-L72 ControlLogix 5570, rev 21.11
s/w: Studio 5000 Logix Designer 21.03
https://imgur.com/a/J537Zsm
In the I/O tree, everything is showing up, but in controller tags, I can not see the In/Out for the modules (see pic). For instance, the first flex module in ScanShed_N is an output module, but there's no "O" in the controller tags. Anyone stumble into this before?
h/w: PLC - 1756-L72 ControlLogix 5570, rev 21.11
s/w: Studio 5000 Logix Designer 21.03
https://imgur.com/a/J537Zsm