Hi all
I'm currently in the process of trying to upload/download to a PV Plus 1250.
The panelview has an extension controlnet card on the rear of it that we use to communicate with the processor.
Up to now it's been ok, however today when trying to put a new .mer into it we are unable to do so.
On picture 1, you can see drilling down through RSLinx that the panelview is visible 00,Panelview Plus 1250, Panelview-Plus.
However using the Transfer Utility you can see on picture 2 I'm unable to navigate through controlnet backplane and the 3 squares just keep illuminating not expanding to the panelview internal memory itself.
I've tired unplugging the controlnet connection from the panelview and going through via Ethernet (patch and crossover), using RS232, USB Stick, 1784 controlnet module but to no avail.
What's strange however, I can connect to the processor through the panelview via Ethernet to controlnet from the panelview, but yet I cant nab off the panelview itself, feels like its just a comms port at the moment.
Even trying to ping it comes back with no result?
Any ideas?
I'm currently in the process of trying to upload/download to a PV Plus 1250.
The panelview has an extension controlnet card on the rear of it that we use to communicate with the processor.
Up to now it's been ok, however today when trying to put a new .mer into it we are unable to do so.
On picture 1, you can see drilling down through RSLinx that the panelview is visible 00,Panelview Plus 1250, Panelview-Plus.
However using the Transfer Utility you can see on picture 2 I'm unable to navigate through controlnet backplane and the 3 squares just keep illuminating not expanding to the panelview internal memory itself.
I've tired unplugging the controlnet connection from the panelview and going through via Ethernet (patch and crossover), using RS232, USB Stick, 1784 controlnet module but to no avail.
What's strange however, I can connect to the processor through the panelview via Ethernet to controlnet from the panelview, but yet I cant nab off the panelview itself, feels like its just a comms port at the moment.
Even trying to ping it comes back with no result?
Any ideas?