Allen Bradley 1770-KF2

Hi guys,

I was requested to upload any relevant mapping files inside this 1770-KF2, as well as extracting any possible information from this 1770-KF2. Anyhow, I just go through the user manual and didn't find any mentioned software or configuration can be uploaded from this 1770-KF2 device.

Appreciate if anyone can correct me if I'm wrong, and share with me your past experience regarding this device.

Thanks for sharing guys. Appreciate your help.

You are right, no software or software configuration.

It's just a DH+ to RS232 or RS422 interface.

The only configuration is done with dip switches.

Ah the memories, the memories......

Used to use these many years ago, even had a cabinet full of them at one point.

Yes, as Mickey says, no software involved, usually a dip switch guide on the bottom of the unit.

Thanks a lot Mickey

Hahahah John Calderwood, I suspect this obsolete device even elder than me

Well, I started using them in 1988, and they had been around a while before that......

hahahah, then definitely elder than me