Phanx11
Member
Hello everyone
I'm new here and was hoping someone can help me out. I have a pneumatic punching/ bending machine that broke down running on a S7-300 that i'm trying to figure out the cause. Hardware all checks out so it has to be something in the PLC.
https://www.upload.ee/files/10492107/Assemb2.zip.html
I've uploaded the whole program. If someone could take a look and tell me:
in FB95 on network 19 there is an instance STAT258 (instance of FB32). If M202.0 on IO12 is True then Q33.1 on OUT10 should be true as well.
What would block Q33.1 from turning on?
I'm new here and was hoping someone can help me out. I have a pneumatic punching/ bending machine that broke down running on a S7-300 that i'm trying to figure out the cause. Hardware all checks out so it has to be something in the PLC.
https://www.upload.ee/files/10492107/Assemb2.zip.html
I've uploaded the whole program. If someone could take a look and tell me:
in FB95 on network 19 there is an instance STAT258 (instance of FB32). If M202.0 on IO12 is True then Q33.1 on OUT10 should be true as well.
What would block Q33.1 from turning on?