Cable needed for Allen Bradley Modem 9300 RADKIT

Hey,

I received an Allen Bradley Modem 9300 RADKIT to be used with my SLC503 processor. Unfortunately the serial cable that has 9 pin d connector on both sides is missing. Does anyone have the cable pinout for that? Is it a standard straight serial cable or is it null modem? There is a null modem adapter with the kit. Can I just use the straight serial cable with null modem adapter if that is needed? Where can I find the pinouts of the cable. I don't want to use the cable that has the end that connects to the programming port. I need the one that has serial D 9 pin connections for both modem and plc channel 0.

Thanks

Paul Kemp

If you just purchased this, and it didn't contain all of the items listed below, I would return it to my distributor. The cable pinput is in this link:
http://domino.automation.rockwell.com/applications/kb/RAKB.nsf/0/B12B70CDA6741ABD8525707C00501614?OpenDocument

9300-RADKIT



1- 9300-9MRT9FRT (CLX, SLC cable – 5ft.)

2- 1761-CBL-PM02 ser. C (MicroLogix Serial Cable – 6ft.)

3- 9300-9M9MNULL (Male to Male 9 pin Null Modem Adapter)

4- 9300-25M9MADAPTER (PLC Adapter)

5- 9300-RADM1/B (Series B Modem)

6- Power Supply (110vac to 12vdc, 600mA)

7- Phone Line Cable (7ft.)

8- Tutorial CD (9300-RADCD1)

9- Quick Start Guide