Sorry if this is a stupid question, I am not as familiar with Siemens hardware as I am Allen Bradley.
Customer specified that we use an interface module with ET200SP I/O. Part Number 6ES7155-6BA01-0CN0. Also specified that we program with Step 7.
I know I have worked with other Siemens modules in the past that are programmable, but this only mentions being an interface and only 300/400 CPUs show up in the Step 7 wizard.
Am I able to actually program this module or is it just a Remote I/O hub for a 300/400 Siemens Profibus PLC?
Thanks in advance.
Customer specified that we use an interface module with ET200SP I/O. Part Number 6ES7155-6BA01-0CN0. Also specified that we program with Step 7.
I know I have worked with other Siemens modules in the past that are programmable, but this only mentions being an interface and only 300/400 CPUs show up in the Step 7 wizard.
Am I able to actually program this module or is it just a Remote I/O hub for a 300/400 Siemens Profibus PLC?
Thanks in advance.