helphelphelp
Member
Hello,
Currently trying to replace a powerflex 527 drive in a machine for motor rotation. The drive is wired the same way and it is the exact same revision number but the drive comes up with a S03 fault when it powers on. I can see the drive status and the IP address is set.
Any idea why this might happen?
Any help is appreciated,
Thanks
Currently trying to replace a powerflex 527 drive in a machine for motor rotation. The drive is wired the same way and it is the exact same revision number but the drive comes up with a S03 fault when it powers on. I can see the drive status and the IP address is set.
Any idea why this might happen?
Any help is appreciated,
Thanks