SamTheLightMaster
Member
Hi guys I have many Fanuc 420s Robots and RH Controls running through out the shop, But just ran across this new issue with 2 of the same robots I just installed, I hooked them up mastered them, teached the whole cell everything works the only problem I'm having is:
Every time I lock out the robot cell, and come out and unlock, turn servos back on hit reset (Servo Disconnect Box) I have to re calibrate the robot.. We have 16 other robots that work fine, (Unlock the cell turn servos back on reset) No Problems I've been searching for answers and cant seem to find any.. just wondering if any of you Fanuc fans can guide me in right direction?
Thanks for any info
Every time I lock out the robot cell, and come out and unlock, turn servos back on hit reset (Servo Disconnect Box) I have to re calibrate the robot.. We have 16 other robots that work fine, (Unlock the cell turn servos back on reset) No Problems I've been searching for answers and cant seem to find any.. just wondering if any of you Fanuc fans can guide me in right direction?
Thanks for any info