AlexanderOrt23
Member
Hello everyone.
I am currently doing a project to teach about ethernet topologies such as ring or bus. For example.
But instead of using an ethernet cables to port directly the EN2TR ports the AEN2TR ports and the ETAP ports to do a ring topology. I would connect all the ports to a Catalyst 2960 switch and use vlans to create a ring topology like this
For example to make this a bus topology i would delete vlan 3 and port AEN2TR2 to vlan 30 and ETAP 1 to vlan 31.
Is this something possible?
Thanks in advance
I am currently doing a project to teach about ethernet topologies such as ring or bus. For example.
But instead of using an ethernet cables to port directly the EN2TR ports the AEN2TR ports and the ETAP ports to do a ring topology. I would connect all the ports to a Catalyst 2960 switch and use vlans to create a ring topology like this
For example to make this a bus topology i would delete vlan 3 and port AEN2TR2 to vlan 30 and ETAP 1 to vlan 31.
Is this something possible?
Thanks in advance