TAGS- from TIA portal v11 to wincc V7 sp3

Shaker Hussein

Member
S
Join Date
Jun 2012
Location
Saudi Arabia
Posts
14
Dear All,
my project has 5 PLC (S7-1200) and I programed them by TIA PORTAL V11.
and I want to connect them by Ether net to SCADA (WINCC EXPLORAL V7 SP3).
how can I take the tags from TIA to (WINCC EXPLORAL V7 SP3)?

B.R.
 

Similar Topics

R
Setting Limits on HMI Input tags by using limit tags - Siemens TIA Portal
Hi, Is there an easy way to limit the input tag by using min and max tags from the PLC? Thanks
Replies
1
Views
1,230
JesperMP
JesperMP
M
Adjust indexed HMI tags after change UDT Tia Portal
Hello guys, I use Tia Portal V16. What is the best way to change the indexed HMI tags when I change the format of an Udt in my plc program...
Replies
0
Views
1,303
mulderm
M
P
TIA Portal HMI Tags
In TIA Portal, Is it possible to have all HMI tags linked automatically to the PLC or do you have to go through each HMI tag individually and link...
Replies
6
Views
4,582
Pele_1968
P
J
Renaming tags in TIA portal
I have a small modification that I want to make to a program in an S7-1500 using TIA portal V14 SP1. I have a global data block containing some...
Replies
6
Views
3,763
mk42
M
R
TIA Portal - rewire tags then moving to struct
Hi, Sometimes I find myself in a situation where I have some scattered variables in datablocks that I want to place under a struct to get a better...
Replies
2
Views
1,975
BryanG
B
Back
Top Bottom