S7-200 Pulse Per Seconds

plcreyes

Member
P
Join Date
Nov 2006
Location
PANAMA
Posts
9
HELLO.
I`m trying to make a pulse per second train on s7-200 (cpu216-2).
Perhaps equivalent at s:42 (clock calendar seconds) in RS-500 allen bradley software.

REGARDS
 
Try the SM Registers

Clock.jpg
 

Similar Topics

X
Pulse Outputs S7200 for Stepper control
G'morning gentlemen. I have been lurking on the forums as a guest for a while and had some queries which needed help. Overview: I am a absolute...
Replies
2
Views
3,493
Xsailor
X
H
how best to create these pulse signals for a sim program s7-1200
Long time reader first time poster. I have the following pulse signals as attached generated by an OEM machine. I am aiming to recreate the...
2
Replies
19
Views
5,194
hadwll
H
L
ET200 SP HA DI card wiring with pulse input
Hello, We have the following DI card that can accept 1,2 and 3 wire DI's ( 6DL1131-6BH00-0PH1). We plan on installing this card for use with a...
Replies
7
Views
1,475
Lc1
L
E
s7-1200 HSC and pulse input from a flowmeter
I am working with a 1214 siemens plc and I have connected the pulse output of a flowmeter into the digital input of the cpu with the HSC enabled...
Replies
2
Views
4,133
travispedley
T
S
S7-200 PLC program to catch the pulse
i Have an S7-200 plc and an single pushbutton. when pushbutton is pressed for the first time output 1 should activate. when pushbutton is...
Replies
13
Views
3,723
geniusintraining
geniusintraining
Back
Top Bottom