Powerflex 755 vs Powerflex 700 - PLCS.net

Nandraj · May 5th, 2019, 02:18 PM

Dear All ,
I have powerflex 755 110kw drive running on devicenet node add 1 but now its got bad , I wanted to replace it with powerflex 700 110kw Can i just add same node and plug and play option works ?
when i used to have armourstart AB drive 1hp to 5hp it use plug and play i used to put same node address in devicenet and just plug and it starts i no need to do any configuration only in scanner module it used to asks for revision change . so i wanted to know that Can powerflex 700 can works plug and play in replace with 755
please hop you will help

thanks ,
nandraj

jraef · May 6th, 2019, 12:32 PM

So you want to replace a newer drive with an older one? Is that because the PF700 is all you have available? That’s the only valid reason I can think of. And if that PF700 has been on a shelf unpowered for a couple of years, you will have to put it through a capacitor reforming procedure.

Assuming that because this is DeviceNet you have a PLC, you will have to change the AOP and probably some of the programming in your PLC because the I/O is different between the two.

May 5th, 2019, 02:18 PM	#1
Nandraj Member Join Date: Dec 2016 Location: India Posts: 51	Powerflex 755 vs Powerflex 700 Dear All , I have powerflex 755 110kw drive running on devicenet node add 1 but now its got bad , I wanted to replace it with powerflex 700 110kw Can i just add same node and plug and play option works ? when i used to have armourstart AB drive 1hp to 5hp it use plug and play i used to put same node address in devicenet and just plug and it starts i no need to do any configuration only in scanner module it used to asks for revision change . so i wanted to know that Can powerflex 700 can works plug and play in replace with 755 please hop you will help thanks , nandraj

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Powerflex 755 rev 10.02 not showing in rslogix 5000 rev 20.01	edwardeduful	LIVE PLC Questions And Answers	6	November 30th, 2017 02:12 PM
1336-WB035 Braking Chopper on a Powerflex 700 VC	Jasondelane	LIVE PLC Questions And Answers	4	December 14th, 2015 01:05 PM
Migrating from 1336 to Powerflex 700 on PLC5 system	Jasondelane	LIVE PLC Questions And Answers	2	December 8th, 2015 05:45 PM
PLC5 Powerflex 700	ddsiller	LIVE PLC Questions And Answers	2	November 19th, 2015 04:06 PM
Powerflex 700 Need Help	Sean Wing	LIVE PLC Questions And Answers	8	August 5th, 2011 12:24 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

May 6th, 2019, 12:32 PM	#2
jraef Member Join Date: May 2006 Location: Northern California Posts: 2,140	So you want to replace a newer drive with an older one? Is that because the PF700 is all you have available? That’s the only valid reason I can think of. And if that PF700 has been on a shelf unpowered for a couple of years, you will have to put it through a capacitor reforming procedure. Assuming that because this is DeviceNet you have a PLC, you will have to change the AOP and probably some of the programming in your PLC because the I/O is different between the two.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)