Device Net Flexi Trouble - PLCS.net

Jorge Perez · October 30th, 2006, 01:33 AM

I CLEAR UP THE MEMORY ON ONE FLEXI IO FROM MY DEVICENET, NOW ALL THE INPUTS AND OUTPUTS, ARE DEATH, AND THE LED IO IS OFF, WHAT CAN I DO ? PLEASE HELP ME

I CANT DOWNLOAD MY BACK UP CONFIGURATION ALSO

jorgegperezv@hotmail.com

first i was running an aplication on the SLC, then i switch to offline mode and then upload and run.

in one of the flexi io, the information the outputs appears ok in the plc and in the led, but there i not voltaje at any output, then i went to deviceNet, i upload the information of the flexi io, clear the memory and then everyone of the inputs and even the inputs went to cero,

and in the IO main LED, its turned off, what can i do please please help me

Christoph · October 30th, 2006, 12:34 PM

Try cycling power to PLC. Make sure to place back into RUN mode.

rsdoran · October 30th, 2006, 12:45 PM

Quote:

Originally Posted by Christoph

Try cycling power to PLC. Make sure to place back into RUN mode.

Definitely be sure it is in RUN mode, I spent day and half or so trying to figure out what was wrong once and had the PLC stopped.

October 30th, 2006, 01:33 AM	#1
Jorge Perez Member Join Date: Oct 2006 Location: JUAREZ Posts: 1	Device Net Flexi Trouble I CLEAR UP THE MEMORY ON ONE FLEXI IO FROM MY DEVICENET, NOW ALL THE INPUTS AND OUTPUTS, ARE DEATH, AND THE LED IO IS OFF, WHAT CAN I DO ? PLEASE HELP ME I CANT DOWNLOAD MY BACK UP CONFIGURATION ALSO jorgegperezv@hotmail.com first i was running an aplication on the SLC, then i switch to offline mode and then upload and run. in one of the flexi io, the information the outputs appears ok in the plc and in the led, but there i not voltaje at any output, then i went to deviceNet, i upload the information of the flexi io, clear the memory and then everyone of the inputs and even the inputs went to cero, and in the IO main LED, its turned off, what can i do please please help me

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Device Net Faults		LIVE PLC Questions And Answers	10	December 9th, 2016 01:15 AM
Program Structure	DDV	LIVE PLC Questions And Answers	78	September 18th, 2006 07:16 AM
Safety Device Net	BobB	LIVE PLC Questions And Answers	18	August 20th, 2005 04:30 PM
Need Device Net Help	Maverick 250	LIVE PLC Questions And Answers	1	May 5th, 2005 11:34 AM
Device net and Allen-Bradley PLC question	Ken Moore	LIVE PLC Questions And Answers	9	November 18th, 2004 11:06 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

October 30th, 2006, 12:34 PM	#2
Christoph Member Join Date: Sep 2003 Location: Indiana Posts: 337	Try cycling power to PLC. Make sure to place back into RUN mode.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)