Hello everyone!
I don't know how to program some thing.
I will tell you an example.
I have a rotary table, which is rotating from 0 to 2048 impulses (high speed counter counts impulses). I need in some situations latch the position (rewrite actual position to the register) and count number of rotation from this latched position.
It must be a real type number with one decimal place (e.g. 1,5 rotation, 2,8 rotation).
With an integer i don't have any problem but i don't know how to bite this with a decimal number.
Mitsubishi FX5, GXWorks 3
Thanks for help!
I don't know how to program some thing.
I will tell you an example.
I have a rotary table, which is rotating from 0 to 2048 impulses (high speed counter counts impulses). I need in some situations latch the position (rewrite actual position to the register) and count number of rotation from this latched position.
It must be a real type number with one decimal place (e.g. 1,5 rotation, 2,8 rotation).
With an integer i don't have any problem but i don't know how to bite this with a decimal number.
Mitsubishi FX5, GXWorks 3
Thanks for help!