siemans s7224 with red lion hmi

chetw

Member
Join Date
Feb 2003
Posts
3
programming red lion vx500t hmi with s7 224 plc. able to function digital inputs, but unable to get red lion to display word values such as position or distance in engineering values or a value from the s7 that means anything. Any help would be most welcome.
 

Similar Topics

Hello folks! I try to interpret how View SE are communicating with the S7 without having very much information, I don't have an I/O List and I...
Replies
1
Views
2,527
I'm trying to figure out how to count up and count down via IDEC Smart Relays which i'm learning are the same as Siemans LOGO I1 Resident entrance...
Replies
1
Views
1,542
Hi guys, I have a understanding of Siemans s7 but know very little about HMI's, i really only use it for fault finding so take it easy on me if i...
Replies
1
Views
1,884
I am converting an old Siemans program to AD and I have a couple of questions. Looking at the old printout I guess NETZWERK # is equal to a...
Replies
5
Views
1,918
Hey Guys and Gals, I have some a piece of old equipment that has a TI545 Siemans Processor and it is communicating with a Nematron IWS-2511T touch...
Replies
0
Views
2,506
Back
Top Bottom