1756-IF16 Single Ended/Differential

makoester1

Member
M
Join Date
Jun 2015
Location
Indiana
Posts
2
Hello,

I have a 1756-IF16 configured for single-ended current inputs. I plan to add (4) 4-wire density transmitters. The operating manual for the density transmitters indicates that the 4-20mA signal is galvanically isolated. Does anyone see a problem with utilizing a single ended configuration?
 

Similar Topics

id10t_error
1756-IF16 Single Ended Mode Scaling
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/1756-um009_-en-p.pdf In the above 1756-IF16 document on page 43, it...
Replies
8
Views
4,926
id10t_error
id10t_error
R
1756-IF16 Wiring Single Ended
If I am using an 1756-IF16 analog input module, single ended do I have to jumper all iRTN and RTN as shown in the wiring diagram. I have a mixture...
Replies
1
Views
3,545
ASF
A
S
Single ended and differetial mode of 1756-IF16
Please anybody advice me what is the difference of single ended mode and differential mode of control logix analog input module.In what...
Replies
1
Views
2,158
Mickey
Mickey
R
1756-IF16 Single-Ended Current App wiring
I am trying to spec out some PLC modules for an upcoming project. Our vendor suggested we use a 1756-IF16 analog input module for connecting to...
Replies
2
Views
7,327
ryanweber101
R
H
A/I module 1756-IF16 Allen Bradley
Hi all, installed on chassis A17 an A/I from Allen-Bradley , problem is what ever I do , all channels are sticked on value 39.9 and cannot change...
Replies
1
Views
115
dummy_bit
dummy_bit
Back
Top Bottom