DIMPOL Member D Join Date Oct 2002 Posts 24 May 21, 2003 #1 LD MW10>=11 R M10.O, 3 This command will reset the bits M10.0, M10.1, M10.2 and M10.3 when MW10 = 11 (s7-200) ?
LD MW10>=11 R M10.O, 3 This command will reset the bits M10.0, M10.1, M10.2 and M10.3 when MW10 = 11 (s7-200) ?
jvdcande Member Join Date Apr 2002 Location Menen Posts 2,178 May 21, 2003 #3 No, it will reset 3 bits starting at M10.0. Thus only bits M10.0, M10.1 and M10.2 will be reset. M10.3 will remain. Kind regards,
No, it will reset 3 bits starting at M10.0. Thus only bits M10.0, M10.1 and M10.2 will be reset. M10.3 will remain. Kind regards,
DIMPOL Member OP D Join Date Oct 2002 Posts 24 May 21, 2003 #4 Thanks for answering. I will make one more question. If i want to multiply 3276 with the content of VD7, the content of VD7 can be changed from four inputs which controlled by me, How can i get the result of the multiply constantly?
Thanks for answering. I will make one more question. If i want to multiply 3276 with the content of VD7, the content of VD7 can be changed from four inputs which controlled by me, How can i get the result of the multiply constantly?